$479.00
Send all your music wirelessly from your iDevice or tablet directly to the B2 Powered Speaker.
Wirelessly stream all your music from any Bluetooth®-enabled device. Your computer, iDevice, or Android phone already has Bluetooth, so get more out of your music with the B2 wireless speaker. Experience award-winning Audioengine® stereo sound, including a hand-built wood cabinet, Bluetooth® aptX® and extended wireless range.
Setup and pairing is really easy and no special software is needed. Here’s how to connect B2 to your tablet, computer, or smartphone:
Remove B2 from its packaging and attach the Bluetooth antenna to the rear panel.
Connect the power cable to B2 rear panel and plug the other end into an AC outlet.
Turn on the power switch and B2 will automatically go into pair mode.
On your device, turn on Bluetooth and select “Audioengine B2” to pair and connect.
Play your music and adjust the volume.
Yep, it really is this easy to get B2 up and running!
The audio quality of most Bluetooth products isn’t usually very inspiring and their limited range can be frustrating. The B2 solves these problems by implementing the aptX codec, which is a high-quality audio converter designed specifically for audio. The B2 also has special circuitry and a precision-tuned antenna to extend the wireless range, providing much more versatility than other Bluetooth speakers.
You already have Bluetooth on your tablet, computer, or iDevice, so get more out of it and experience stunning audio with the Audioengine B2 Bluetooth Speaker including aptX, extended range, hand-built wood cabinet, and custom speakers.
The hand-finished all-wood cabinet of the B2 reflects traditional Audioengine design and the high-quality components and audio fidelity are typical of Audioengine’s commitment to great sound at affordable prices. The Audioengine B2 continues to close the gap between your computer music and home hi-fi and even if you’re not an audio enthusiast we guarantee your music will sound better!
High-fidelity Bluetooth® with aptX® transmission and extended range
Supports all Bluetooth-enabled devices
Hand-built wood cabinet with magnetic speaker grills
Auxiliary analog mini-jack input
Built-in auto voltage switching power supply
Powered Bluetooth speaker
Dual class AB monolithic
60W peak total (15W RMS, 30W peak per channel), AES
2.75” Kevlar woofers
3/4“ Silk dome tweeters
Bluetooth, 3.5mm stereo mini-jack analog
10K ohms unbalanced
65Hz-22kHz (±2.0dB)
>95db (typical A-weighted)
<0.05% at all power settings
-50dB
3-stage redundant regulation
100-240V, 50/60Hz auto-switching
Output current limiting, thermal over-temperature, power on/off transient protection
Bluetooth 4.0 audio
SBC, aptx
A2DP, AVRCP
up to 100ft (30m) typical
TI PCM5102A
24-bit (upsampled)
Determined by Bluetooth
~30 milliseconds (ms)
4.25”(H) x 12.25”(W) x 5.50”(D)
10lbs (4.6kg)
10.5” (H) x 16” (W) x 7.5” (D)
Operating temperature: 24° to 105°F (0°C to 40°C)
Storage temperature: -4° to 115°F (-20°C to 46°C)
Relative humidity: 5% to 95% non-condensing
18mm thick MDF cabinets with real wood veneer
3/4″ silk dome tweeters with neodymium magnets
2.75″ Kevlar woofers with advanced voice coils
Power cable
Antenna
Mini-jack audio cable, 1.5 meters (~5 feet)
Microfiber speaker bag
Quickstart guide
Reviews
There are no reviews yet.